18 x 14 FireWire audio interface
8 x 24-bit/96kHz analog inputs (1/4” TS)
4 x 24-bit/96kHz analog outputs (1/4' TRS/TS)
2 x 4 24-bit/192kHz analog I/O capability
8 x 8 ADAT Lightpipe I/O
digital S/PDIF (coaxial) I/O w/ 2-channel PCM
digital out also supports pass-through of AC-3/DTS surround-encoded content
dual mic/instrument preamps (Neutrik XLR/ 1/4” TS) with
• input level controls
• 20dB pad
• phantom power
• signal LEDs
two independently assignable headphone outputs with individual level controls (1/4" TRS)
flexible software-controlled mixing of hardware and software I/O
aux sends on all channels and aux output assign allows for dedicated headphone mixes and sends to external effects
user-assignable front-panel level control (output, input, software return, aux send)
near zero-latency hardware direct monitoring
low-latency ASIO software direct monitoring
momentary switch for A/B cueing two software-assignable headphone sources or switching ASIO monitoring on/off
1 x 1 16-channel MIDI I/O
wordclock (BNC) for sync to external devices
power on/off switch with indicator LED
powered via FireWire bus* or included DC power adapter
two convenient high-bandwidth FireWire ports
rugged steel construction
includes Ableton Live Lite music production software, so you can make music right away
* requires 6-pin connection
line inputs (TS) 1-8
frequency response: +/- 0.1 dB, 22Hz to 22kHz
dynamic range: 105dB, A-weighted
signal-to-noise ratio: -105dB, A-weighted
THD+N: <0.00281% (-91dB)
crosstalk: -107dB @ 1 kHz
nominal input level: -10dBV
maximum input level: +2.1dBV, typical
input impedance: 10k Ohms, typical
mic/inst. inputs (balanced) 1-2 at minimum gain
frequency response: +/- 0.1 dB, 22 Hz to 22 kHz
dynamic range: 105dB, A-weighted
signal-to-noise ratio: -105dB, A-weighted
THD+N: <0.00281% (-91dB)
crosstalk: -105 dB @ 1 kHz
maximum input level: -3.8 dBu, typical
input impedance: inst in: 500k Ohms, typical; mic in: 1.8k Ohms, typical
adjustable gain: > 40 dB
pad: -20 dB
total gain range: +60 dB
line outputs (TRS) 1-4
frequency response: 192 kHz: +/- 1 dB, 22Hz – 80kHz
96kHz: +/- 0.5 dB, 22Hz – 40kHz
48 kHz: +/- 0.1 dB, 22Hz – 22kHz
dynamic range: 107dB, A-weighted
signal-to-noise ratio: -107dB, A-weighted
THD+N: <0.00301% (-90.5 dB)
crosstalk: -106dB @ 1 kHz
nominal output level: +4dBu balanced, -10dBV unbalanced
maximum output level: +10.2dBu balanced, typical; +2.0dBV unbalanced, typical
output impedance: 150 Ohm
load impedance: 600 Ohm minimum
headphone outputs at maximum volume into 32 Ohm load
frequency response: +/- 1 dB, 22Hz to 22kHz
power into Ohms: 16 mW into 32 Ohms
THD+N: <0.04987% (-66.1 dB)
signal-to-noise ratio: -96 dB, A-weighted
max output level into 32 Ohms: -3.0dBV, typical
output impedance: 75 Ohm
load impedance: 32 to 600 Ohms
word clock
output: up to 192kHz
input: up to 96kHz
pass-through I/O: up to 96kHz
impedance: 75 Ohms
analog sampling rates: 44.1kHz to 192kHz for analog input 1/2 and all analog outputs
44.1kHz to 96kHz input on channels 3-8
digital sampling rates (kHz) 44.1, 48, 88.2, and 96 for coaxial S/PDIF in and out
44.1 and 48 for optical S/PDIF in & out
44.1, 48, or 88.2, 96 for ADAT I/O in S/MUX mode
(all values tested at 48kHz sample rate unless otherwise stated)
ASIO 2
MME
Sound Manager
DirectX
Mac OS X Core Audio / Core MIDI
GSIF 2
Pentium 3 – 800MHz or higher
(may be higher for laptops)
256MB RAM; DirectX 9.0b or higher
Windows XP (SP2)*; Windows 2000 (SP4)
(Windows 98, 98SE, Me or NT not supported)
* Home and Professional Edition only. Windows Media Center Edition is not currently supported.
** M-Audio suggests you also check the minimum system requirements for your software, as they may be greater than the above.
G3** 800MHz or G4 733MHz or higher
(may be higher for laptops)
OS 9.2.2 w/ 256MB RAM;
OS 10.2.8 w/ 256BM RAM; OS 10.3 or greater w/ 512MB RAM
* G3/G4 accelerator cards not supported; native FireWire ports required
** M-Audio suggests you also check the minimum system requirements for your software, as they may be greater than the above.
|
